Remote ssh connect from iPad P.C. and laptop using dynamic ip address Posted on October 25, 2015 at October 25, 2015 by Elijah 3206 2 Keep Reading : Add Clock Via i2c Chain connect pressure/temperature module i2c on clock module Hello World LED Blinking
GPS RESPONSE CODE ORDER Posted by Elijah - October 18, 2015 0 in response to AT+CGPSINF=0 0 longitude 1 latitude 2 altitude 3 UTC Broadcast Time 4 TTFF Time To First Fix…
LED Blinking Posted by Elijah - August 15, 2015 0 You will need the following things: Raspberry pi configured (see previos lessons) 5 Volt LED bulb(s) 2 jumper wires m/f…
python to send a SMS message Posted by Elijah - October 18, 2015 0 [crayon-68ccabdd8341b034091719/] Keep Reading : Serial Communication with SMS Modem (FONA) GPS RESPONSE CODE ORDER Serial Commands used by our Satellite…
Raspi-config Posted by Elijah - August 15, 2015 0 First you will need to open terminal. Terminal is located at the top of your raspberry pi screen. Terminal is…
MakeZine ran an article on my 2017 Laser Science Project Posted by Elijah - August 26, 2017 0 On June 9, 2017, My article on everything that went right, wrong, and totally sideways on my laser cutting experiment…
nice elijah
thnx